Kia Sorento: License Lamps Removal
Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Body Electrical System / Lighting System / License Lamps Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the license lamp lens (A) from the panel after loosening
a screw.
|
| 3. |
Replace the bulb (A).
|
Front Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
...
License Lamps Installation
1.
Install the bulb.
2.
Install the license lamp lens.
...
See also:
Input Speed Sensor Signal Waveform
...
Accelerator Pedal Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
SRS airbag system monitors
SRS airbag system warning light
A diagnostic system continually monitors
the readiness of the SRS airbag system
(including front seatbelt pretensioners)
with the ignition switch in the “ON” po ...
Copyright www.ksmanual.com 2014-2022