Kia Sorento: Intelligent Speed Limit Assist operation. Warning and control
Warning and control
Intelligent Speed Limit Assist in your Kia Sorento features the following automated warnings and dynamic controls:
-
Displaying the speed limit
-
Speeding warning
-
Changing the set speed
-
Auto set speed change
TIP
Intelligent Speed Limit Assist warnings and controls operate based on adjusting the Offset to “0”. For more information about adjusting the Offset setting, refer to Intelligent Speed Limit Assist (ISLA).
Displaying the speed limit
|
The instrument cluster clearly displays current speed limit information captured by your Kia Sorento camera and navigation systems.
TIP
-
If Intelligent Speed Limit Assist cannot recognize speed limit information from the road, the instrument cluster displays the ‘---’ sign. Please refer to Intelligent Speed Limit Assist malfunction and limitations if the road signs are difficult for the function to recognize.
-
Intelligent Speed Limit Assist provides other road sign information in addition to the posted speed limit. The additional road sign information provided may vary according to your region.
-
The images or colors may display differently depending on the specifications of the instrument cluster or theme selected.
Speeding warning
|
|
When you drive at a speed higher than the displayed speed limit, the red speed limit indicator appears to prompt immediate safe deceleration.
Changing the set speed
|
|
|
If the posted speed limit on the road changes while you are operating Manual Speed Limit Assist or Smart Cruise
Control, the instrument cluster displays an up or down arrow to inform you to change the set speed. You can change
the
set speed according to the speed limit by using the ( 
) or ( 
) switch on the steering wheel.
Auto set speed change (if equipped with navigation)
|
|
When you operate Manual Speed Limit Assist or Smart Cruise Control, if the speed you set is the same as the posted speed limit, the set speed automatically adjusts according to the speed limit afterward. The auto set speed change function operates on roads with a speed limit of above 45 mph (70 km/h). When you activate the function, the set speed displays in green on the instrument cluster.
TIP
-
When you drive at a speed lower than the speed limit, set the offset below “0”, or push the (
) switch to decrease your set speed.
-
Even after you change the set speed according to the posted speed limit, you can still drive the vehicle over the speed limit. If necessary, engage the brake pedal to reduce your speed.
-
If the posted speed limit is under 20 mph (30 km/h), the set speed change and auto set speed change functions will not work.
-
Intelligent Speed Limit Assist operates using the speed unit you set in the instrument cluster. If you set the speed unit to a different unit than the one used in your country, Intelligent Speed Limit Assist may not operate properly (except in Australia or Russia).
TIP
-
For more information about Manual Speed Limit Assist operation, refer to Manual Speed Limit Assist (MSLA).
-
For more information about Smart Cruise Control operation, refer to Smart Cruise Control (SCC).
Speed Limit
Dr ...
See also:
Components Location
1. AVN (A/V & Navigation) head unit
2. Tweeter speaker
3. External amplifier
4. Roof antenna (Radio+Sirius+GPS)
5. Front door speaker
6. Rear door speaker
7. Subwo ...
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
Forward Collision-Avoidance Assist malfunction
(A) Check Driver Assistance system
...