Kia Sorento: Intake Manifold Components

Air Cleaner Removal and Installation

1. Remove the engine cover. 2. Remove the air duct (A). 3. Remove the battery. (Refer to Engi ...

Intake Manifold Removal and Installation

1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake And Exhaust System - "Air Cleaner ...

See also:

Specifications
ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

Auto Light Switch Inspection
Operate the auto light switch, then check for continuity between terminals of multi-function switch connector. ...

Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch* fl ...