Kia Sorento: Ignition Coil Installation - Ignition System - Engine Electrical System - Kia Sorento XM 2011-2023 Service ManualKia Sorento: Ignition Coil Installation

Second Generation XM (2011-2023) / Kia Sorento XM 2011-2023 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Installation

1.
Install in the reverse order of removal.

Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)

Ignition Coil Removal
1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Ignition Coil Inspection
1. Measure the primary coil resistance between terminals (+) and (-). Standard value: 0.62Ω В± 10% ...

See also:

Output Speed Sensor Signal Waveform
...

BJ Boot Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Relay Box (Passenger Compartment) Inspection
Fuse 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit ...

Copyright В© www.ksmanual.com 2014-2023