Kia Sorento: Hands Free Switch Removal

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Removal

1.	Remove the driver airbag module. (Refer to Restraint - "Airbag module")

2.	Remove the steering wheel front cover (A) after loosening the screws.

3.	Disconnect the audio remote control switch connector (A).

4.	Remove the handsfree remote switch (A) after loosening the screws.

Hands Free Switch Inspection

1. Check the handsfree remote control switch for resistance between No.2 and No.5 terminals in each switch position. [Call + Hang Up] Switch ...

Hands Free Switch Installation

1. Install the handsfree remote switch to the steering wheel front cover. 2. Install the steering wheel front cover. 3 ...

See also:

Curtain Airbag (CAB) Module Description
Curtain airbags are installed inside the headliner (LH and RH) and protect the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of curtain airbag by us ...

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the e ...

Muffler Removal and Installation
1. Remove the front muffler (A) after loosening the mounting nuts. Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft ...

Categories

Copyright © www.ksmanual.com 2014-2026