Kia Sorento: Fuel Pressure Regulator Removal and Installation - Fuel Delivery System - Engine Control / Fuel SystemKia Sorento: Fuel Pressure Regulator Removal and Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator Removal and Installation

Removal
1.
Remove the fuel pump module.
(Refer to Fuel Delivery System - "Fuel Pump Module")
2.
Disconnect the fuel pump motor connector (A) and fuel sender connector (B).

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

3.
Remove the fuel feed tube quick-connector (B) after removing the clip (A).

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

4.
Remove the fuel sender assembly (A) after pushing the hooks in the direction of the arrows.

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

5.
Remove the stopper (A).

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

6.
Remove the head assembly (A) and O-ring (B).

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

7.
Remove the reservoir cup (A) after pulling the hooks in the direction of the arrows.

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

8.
Remove the fuel pressure regulator (A) after removing the fixing clip (B).

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Removal illustration

Installation
1.
Install in the reverse order of removal.
Note
Be careful not to miss the O-ring (A) when assembling the plate.

Engine Control / Fuel System — Fuel Delivery System / Fuel Pressure Regulator / Removal and Installation / Installation illustration

2.
Check for leakage the fuel after installation.
Fuel Pressure Regulator Components and Components Location
Components 1. Clip2. Stopper3. Plate Assembly4. O-Ring 5. Reservoir Cup6. Clip7. Fuel Pressure Regulator...
Fuel Pump & Tube Assembly Components and Components Location
Components 1. Clip2. Stopper3. Plate Assembly4. O-Ring5. Fuel Sender Assembly6. Reservoir Cup7. Clip8. Fuel Pressure Regulator 9. Fuel Pump Wiring10....
See also:

Fuel Tank Pressure Sensor (FTPS) Removal and Installation
Removal 1. Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly") ...

Heated Steering wheel Inpection
1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ ...

Brake Pedal Inspection
1. Check the bushing for wear. 2. Check the brake pedal for bending or twisting. 3. Check the brake pedal retur ...

Copyright © www.ksmanual.com 2014-2026 - 0.0494