Kia Sorento: Fuel Inlet Housing & Panel Repair Procedures

Removal

Fuel Filler Door Housing

Reuse of fuel filler housing is prohibited. When removing the fuel inlet housing, replace it with a new one.

1.	Disconnect the battery negative ( - ) terminal.

2.	Open the fuel filler door cap (A).

Remove the fuel filler door housing.

Be careful not to damage the connector of the fuel filler door opener.

(1)	Insert the awl, press 6 hooks (B) and unlock.

(2)	Remove the fuel filler door housing assembly (C) by inserting the remover into the hall (A) and pulling it in the direction of the arrow.

Body (Interior and Exterior) — Fuel Filler Door / Fuel Inlet Housing & Panel / Repair Procedures / Removal illustration

4.	Disconnect the fuel filler door opener connector (A).

Fuel Filler Door Panel

If the hook (A) is broken, replace the fuel inlet housing assembly with a new one.

1.	Lift the hook (A) and remove the fuel inlet panel (B).

Installation

1.	Install in the reverse order of removal.

...

Inspection 1. Remove the luggage side trim [LH]. (Refer to Luggage Trim - "Luggage Side Trim") ...

Manuals list