Kia Sorento: Front Washer Motor Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Windshield Wiper/Washer / Front Washer Motor Installation

1.

Reassemble the washer reservoir.

Before installing the pump motor, check the filter for foreign material or contamination. if necessary, clean the filter into the pump motor.

2.	Connect the washer motor connector and washer hose.

3.	Install the washer motor.

4.	Reassemble the front bumper cover.

Front Washer Motor Removal

- When servicing the washer pump, be careful not to damage the washer pump seal. ...

Rear Wiper/Washer

...

See also:

Description
System Operation Typically, lane departure warning is activated at a speed over 60 km, but suppressed in case of unintentional lane departure when driver do not operate turn signal. S ...

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Categories

Copyright © www.ksmanual.com 2014-2026