Kia Sorento: Front Seat Switch Repair Procedures

Inspection

[Front Seat]

1.	Remove the console upper cover. (Refer to Body - "Console Upper Cover")

2.	Push and hold the switch, check for continuity between signal terminal and ground terminal. [Heater Type]

[Rear Seat]

1.	Remove the rear door trim. (Refer to Body - "Rear Door Trim")

2.	Push and hold the switch, check for continuity between signal terminal and ground terminal. [Safety] [Manual]

Removal

Front Seat Heater / Ventilation Switch

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the console upper cover. (Refer to Body - "Console Upper Cover")

3.	Disconnect the seat heater/ventilation switch connector (A). [LH] [RH]

4.	Remove the floor console switch complete (B) after removing the screws. [LH] [RH]

Rear Seat Heater Switch

1.	Remove the rear power window switch. (Refer to Power Window - "Power Window Switch" )

Integrated Memory Seat (IMS) Switch

1.	Remove the front driver door trim. (Refer to Body - "Front Door Trim")

2.	Remove the memory power seat switch (A) after removing the screws.

Power Seat Control Switch

1.	Remove the front seat shield outer cover. (Refer to Body - "Front Seat Shield Outer Cover")

2.	Remove the power seat control switch (A) after removing the screws.

Installation

1.	Install in the reverse order of removal.

On Vehicle Inspection Diagnostic with KDS 1. The seat electric can quickly diagnosed for problems with the KDS. (Refer to...

Inspection Driver/Passenger Seat Heater 1. Check for continuity and measure the resistance between terminals. ...

Manuals list