Kia Sorento: Front Leg Rest Assembly Repair Procedures - Seat (Front) - Body (Interior and Exterior)Kia Sorento: Front Leg Rest Assembly Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Seat (Front) / Front Leg Rest Assembly Repair Procedures

Removal and Installation
1.
Remove the front seat cushion cover.
(Refer to Seat (Front) - "Front Seat Cushion Cover")
2.
Disconnect the leg rest motor connector (A).

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

Information
Clip position :

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

3.
Remove the leg rest assembly (A) after removing the bolts.

Tightening torque :
19.6 - 32.4 N·m (2 - 3.3 kgf·m, 14.5 - 23.9 lb·ft)

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

4.
Remove the leg rest upper cover (A) after removing the screws.

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

5.
Remove the leg rest cover assembly (A).

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

Information
Clip position :

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

6.
Remove the leg rest cover (A).

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

Information
Clip position :

Body (Interior and Exterior) — Seat (Front) / Front Leg Rest Assembly / Repair Procedures / Removal and Installation illustration

7.
Install in the reverse order of removal.
Front Seat Frame Assembly Repair Procedures
Removal and Installation 1. Remove the front seat back cover. (Refer to Seat (Front) - "Front Seat Back Cover") ...
Seat (Rear)
...
See also:

Flex Steering Instruction
Flex Steering is system to choose the three modes power steering depending on driver preference or driving conditions.    ...

High Mounted stop lamp Removal
High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to Body - " ...

Air Ventilation Seat Control Unit Component Location
...

Copyright © www.ksmanual.com 2014-2026 - 0.0501