Kia Sorento: Front Impact Sensor (FIS) Removal and Installation
Kia Sorento (MQ4, 2021-2026) Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Removal and Installation
| Removal |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Disconnect the front impact sensor connector (A).
[Driver's Side]
[Passenger's Side]
|
| 3. |
Remove the front impact sensor (A) after removing the bolt.
[Driver's Side]
[Passenger's Side]
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
| 2. |
Check that the airbag system operates normally.
|
On Vehicle Inspection
Diagnostic with KDS
1.
The front impact sensor can be more quickly diagnosed for problems with the ...
Front Impact Sensor (FIS) On Vehicle Inspection
...
Brake System
See also:
Timing Chain Cover Repair procedures
Removal
This working procedure does not require engine removal.
...
System settings
Press the
key
Select [System]
Select menu through
TUNE knob
Memory Information
Displays currently used memory and total system memory.
Select [Memory Information]
OK The currently us ...
Starter Inspection
Starter Solenoid Inspection
1.
Disconnect the lead wire from the M-terminal of solenoid switch.
2.
Connect the battery as shown. If ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.053