Kia Sorento: Exhaust Gas Temperature Sensor (EGTS) Removal and Installation
Kia Sorento (MQ4, 2021-2026) Service Manual / Emission Control System / Exhaust Emission Control System / Exhaust Gas Temperature Sensor (EGTS) Removal and Installation
| Removal |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the engine cover.
(Refer to Engine Mechanical System - "Engine Cover")
|
| 3. |
Disconnect the Exhaust Gas Temperature Sensor (EGTS) connector (A).
|
| 4. |
Separate the EGTS connector (A) by pulling it in the direction of arrow from the bracket.
|
| 5. |
Separate the EGTS wiring (A) after removing the fastener.
|
| 6. |
Remove the EGTS (A).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
|
Specification
Temperature
Resistance (Ω)
°C
°F
-40
-40
...
Exhaust Gas Temperature Sensor (EGTS) Specifications
Specification
Item
Specification
Rated voltage (V)
5
Supply voltage (V)
4.75 - 5...
Gasoline Particulate Filter (GPF) Pressure Sensor Specifications
See also:
Child restraint system
Children riding in the vehicle should sit in the rear seat and must always be
properly restrained to minimize the risk of injury in an accident, sudden stop or
sudden maneuver.
According to acciden ...
Circuit Diagram
...
Rear Disc Brake Installation
1.
Installation is the reverse of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0559