Kia Sorento: Dual Clutch Transmission Control Oil Inspection - Power Train - MaintenanceKia Sorento: Dual Clutch Transmission Control Oil Inspection

Kia Sorento (MQ4, 2021-2026) Service Manual / Maintenance / Power Train / Dual Clutch Transmission Control Oil Inspection

Inspection
Dual Clutch Transmission Control Oil Level Check
1.
After starting the engine and warming up the control oil temperature to 20 - 30°C (68 - 86°F), move the vehicle forward and reverse more than once.
Note
•
Check at 20 - 30°C (68 - 86°F) conditions to reduce the level deviation of the control oil according to the oil temperature.
•
Check the oil temperature using KDS.
2.
Place the vehicle on a level ground.
3.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
4.
Remove the filler plug (A).

Tightening torque :
34.3 - 44.1 N·m (3.5 - 4.5 kgf·m, 25.3 - 32.5 lb·ft)

Maintenance — Power Train / Dual Clutch Transmission Control Oil / Inspection illustration

5.
Measure the oil level by inserting a suitable tool (A) into the filler plug hole.

Normal : 110 - 120 mm (4.3 - 4.7 in.) from the installation surface of the filler plug
Insufficient (abnormal) : DCT transmission body replace
Specification : Kia genuine oil (WET DCT HYDRAULIC OIL, WET DCT HYDRAULIC CONTROL OIL)

Maintenance — Power Train / Dual Clutch Transmission Control Oil / Inspection illustration

Note
Kia genuine oil is a genuine product developed for the optimal performance of the wet DCT. If the genuine oil is not used, serious problems may occur in the DCT.
Information
Use a depth gauge more than 140 mm (5.5 in.) in depth to measure fluid level.

Maintenance — Power Train / Dual Clutch Transmission Control Oil / Inspection illustration

6.
Install in the reverse order of removal.
Note
The existing filler plug gasket (A) should be replaced with a new one when reinstalling the filler plug.

Maintenance — Power Train / Dual Clutch Transmission Control Oil / Inspection illustration

Automatic Transaxle Fluid Inspection
Inspection Automatic Transaxle Fluid (ATF) Level Check ...
Dual Clutch Transmission Cooling & Lubricating Oil Inspection
Inspection 1. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") ...
See also:

Panorama Sunroof Switch Components
...

Side Airbag (SAB) Removal and Installation
Removal Front Side Airbag 1. Disconnect the battery negative ( - ) terminal. ...

Work Safety Precautions
Work Safety Precautions ...

Copyright © www.ksmanual.com 2014-2026 - 0.0513