Kia Sorento: DC DC converter Schematic Diagrams. DC DC converter Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / DC DC converter Schematic Diagrams. DC DC converter Repair procedures

DC DC converter Schematic Diagrams

Circuit Diagram

Engine Control / Fuel System — ISG (Idle Stop & Go) System / DC DC converter / Schematic Diagrams / Circuit Diagram illustration

DC DC converter Repair procedures

Removal

1.	Remove the crash pad center panel. (Refer to Body - "Crash Pad Center Panel")

2.	Disconnect the DC/DC converter connector (A).

Remove the DC/DC converter (A) after loosening the mounting nuts.

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Engine Control / Fuel System — ISG (Idle Stop & Go) System / DC DC converter / Repair procedures / Removal illustration

Installation

Install in the reverse order of removal.

After reconnecting the battery negative cable, ISG function does not operates until the system is stabilized, about 3 hours. If disconnecting the negative (-) battery cable from the battery during repair work for the vehicle equipped with AMS function, Battery sensor recalibration procedure should be performed after finishing the repair work.

DC DC converter Description and Operation. DC DC converter Components and Components Location

DC DC converter Description and Operation Description Due to the considerably more frequent occurrence of starting operations, the electrical load that occurs often l...

ISG OFF switch Repair procedures

Inspection 1. Remove the floor console upper cover. (Refer to Body - "Console Upper Cover") 2....

Kia Sorento: DC DC converter Schematic Diagrams. DC DC converter Repair procedures

DC DC converter Schematic Diagrams

DC DC converter Repair procedures

See also:

Manuals list