Kia Sorento: Crankshaft Damper Pulley Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Drive Belt System / Crankshaft Damper Pulley Repair procedures

Removal and Installation

1.	Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

2.	Remove the drive belt and water pump belt. (Refer to Drive Belt System - "Drive Belt")

When installing and removing the crankshaft damper pulley mounting bolts, use SST (09231 - 3D100) to hold the ring gear after removing the dust cover.

(1)

Remove the dust cover (A) and transaxle mounting bolt (B).

Tightening torque :

42.1 - 48.0 N·m (4.3 - 4.9 kgf·m , 31.1 - 35.4 lb·ft)

Engine Mechanical System — Drive Belt System / Crankshaft Damper Pulley / Repair procedures / Removal and Installation illustration

(2)	To put the holder (B) in the ring gear (C) teeth, adjust the length of the holder nuts (A).

(3)	Adjust the angle of the arms (D) so that the two transaxle mounting bolts can be fastened tothe original mounted holes.

(4)	Fully tighten the bolts and nuts for SST (09231 - 3D100).

Remove the crankshaft damper pulley (A).

Tightening torque :

114.7 - 120.6 N·m (11.7 - 12.3 kgf·m , 84.6 - 88.9 lb·ft) + (68 - 72°)

Engine Mechanical System — Drive Belt System / Crankshaft Damper Pulley / Repair procedures / Removal and Installation illustration

5.	Install in the reverse order of removal.

Drive Belt Tensioner Repair procedures

Removal and Installation Drive Belt Tensioner 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") ...

Engine And Transaxle Assembly

...

Kia Sorento: Crankshaft Damper Pulley Repair procedures

See also:

Manuals list