Kia Sorento: Cooling Fan Repair procedures
Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Repair procedures
| Removal and Installation |
| Cooling Fan Assembly |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the radiator.
(Refer to Cooling System - "Radiator")
|
| 3. |
Remove the cooling fan (A) from the radiator.
|
| 4. |
Install in the reverse order of removal.
|
| Inspection |
| Fan motor |
| 1. |
Turn ignition switch "OFF" and connect the KDS to the data link connector.
|
| 2. |
With the gear shift in P (Park) position and ignition switch "ON" (LED of the power button
illuminates in red), select the "Actuation Test" function.
|
| 3. |
Actuation the cooling fan motor.
|
(1) Start the "Fan motor speed" of the actuation function.
(2) Actuation by pressing the start button.
(3) Visually check the operation of the cooling fan.
(4) Stop the actuation by pressing the stop button.
Reservoir Tank Repair procedures
Removal and Installation
1.
Remove the reservoir tank.
...
Reservoir Tank Repair procedures. Cooling Fan Components and Components Location
Components
1. Pressure cap 2. Reservoir tank water hose 3.
Degassing hose 4. Reaservoir tank5. Radiator upper hose6. Radiator lower hose
7. Radiator ...
Radiator Components and Components Location
See also:
Smart Key Code Saving Repair Procedures
Code Saving
...
Closing and locking the fuel filler door
To lock the fuel filler door on your Kia Sorento, ensure the vehicle's central locking system is engaged using one of
the following methods:
Press the lock button on your smart k ...
Knock Sensor (KS)
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knocking.
Whe ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0529