Kia Sorento: Connected Car Navigation Cockpit (ccNC) Repair Procedures

Removal

1.	Remove the cluster support bracket. (Refer to Body - "Cluster Support Bracket)

2.	Remove the Connected Car Navigation Cockpit (ccNC) (A) after removing the screws.

3.	Disconnect the Connected Car Navigation Cockpit (ccNC) connectors (A).

Installation

1.	Install in the reverse order of removal.

Perform the order below with the KDS when replacing the Connected Car Navigation Cockpit (ccNC).

(S/W Management → Connected Car Navigation Cockpit → AVN-FPM Learning Mode)

(S/W Management → Connected Car Navigation Cockpit → Variant Coding)

(S/W Management → Wide Rear View Camera → Variant Coding)

Refer to the KDS screen for operating conditions and details.

3.	Perform Over The Air (OTA) controller S/W update with KDS. (Refer to Security and Vehicle Ignition System - "Over The Air (OTA)")

Connected Car Navigation Cockpit (ccNC) Components and Components Location Component 1. Driver's side Crash Pad Side Cover2. Passenge...

On Vehicle Inspection Diagnostic with KDS 1. The AMP can quickly diagnosed for problems with the KDS. (Refer to "DTC...

Manuals list