Kia Sorento: Canister Close Valve (CCV) Removal and Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Emission Control System / Evaporative Emission Control System / Canister Close Valve (CCV) Removal and Installation

Removal

When the vehicle is stopped while driving, a 'click' sound may be generated from the driver's rear seat, but this is the sound that the Canister Close Valve (CCV) operates normally during the fuel tank leakage diagnosis process, and is not related to safety and performance issues.

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the under cover (A).

3.	Disconnect the Canister Close Valve (CCV) connector (A).

4.	Separate the vapor tube quick-connector (A).

5.	Remove the CCV fixing fastener (A).

6.	Rotate the CCV (A) in the arrow direction about 30°.

7.	Remove the CCV (A) in the arrow direction.

Installation

Install in the reverse order of removal.

•	If the Canister Close Valve (CCV) is dropped, it may cause internal damage. (Do not reuse)

•	Be careful not to get foreign matter into the CCV.

Canister Inspection. Canister Close Valve (CCV) Specifications. Canister Close Valve (CCV) Components and Components Location. Canister Close Valve (CCV) Description and Operation

Canister Inspection. Canister Close Valve (CCV) Specifications Canister Inspection Inspection 1. Visual inspection for the following i...

Canister Close Valve (CCV) Inspection

Inspection 1. The evaporative emission control system can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide"...

Kia Sorento: Canister Close Valve (CCV) Removal and Installation

See also:

Manuals list