Kia Sorento: Blower Motor Removal and Installation. Blower Motor Inspection
Kia Sorento (MQ4, 2021-2026) Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Motor Removal and Installation. Blower Motor Inspection
Blower Motor Removal and Installation
| Removal |
| 1. |
Disconnect the battery negative ( - ) terminal.
|
| 2. |
Remove the crash pad under cover.
(Refer to Body - "Crash Pad Under Cover")
|
| 3. |
Disconnect the blower motor connector (B) and remove the blower motor (A) by removing the screws.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Blower Motor Inspection
| Inspection |
| 1. |
IG OFF.
|
| 2. |
Disconnect the blower motor connector.
(Refer to Blower Motor - "Removal and Installation")
|
| 3. |
Apply voltage to the 1 terminal and ground the 4 terminal to check whether the motor is running.
|
| 4. |
If the blower motor does not work, replace it with a new blower motor.
|
Replacement
1.
Open the glove box (A).
2.
Remove the air damper (A).
...
Climate Control Air Filter Replacement
Blower Unit Removal and Installation. Intake Actuator Description and Operation
Blower Unit Removal and Installation
Removal
1.
Separa...
Blower Unit Removal and Installation. Intake Actuator Description and Operation. Intake Actuator Removal and Installation
See also:
Transaxle Control Module (TCM) Removal
When replacing the TCM, the vehicle equipped with the immobilizer
must be performed procedure as below.
[In the ...
Rear Glass Defogger Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia panel (A).
(Refer to Body - "Crash pad")
...
Special driving conditions
In poor weather or road conditions, you should drive even more carefully than usual to ensure the safety of everyone
on board your Kia Sorento.
Hazardous driving conditions
When you encount ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0571