Kia Sorento: Auto Temperature Control Unit Removal and Installation
| Removal |
| 1. |
Remove the crash pad center panel.
(Refer to Body - "Crash Pad Center Panel")
|
| 2. |
Disconnect the auto temperature control unit connector (A).
|
| 3. |
Remove the auto temperature control unit (A) after removing the screws.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
| 2. |
Perform Over The Air (OTA) controller S/W update with KDS.
(Refer to Body Electrical System - "Over The Air (OTA)")
|
Heater and A/C Controller (Rear) Removal and Installation. Auto Temperature Control Unit On Vehicle Inspection
Advanced Driver Assistance System (ADAS)
See also:
OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Specifications. OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Components and Components Location
OD Clutch & LR Brake Control Solenoid Valve (OD/C & LR/B_VFS) Specifications
Specification
Item
Specification
...
Shift Lever Removal
1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Dis ...
IPM Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
