Kia Sorento: Air Ventilation Seat Control Unit Removal - Seat Electrical - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Air Ventilation Seat Control Unit Removal

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Control Unit Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the air ventilation seat control unit (A) after loosening screws.

Air Ventilation Seat Control Unit Component Location
...

Air Ventilation Seat Control Unit Installation
1. Install the air ventilation seat control unit and connector. ...

See also:

Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solen ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts with the specified tightening order. ...

Rear Shock Absorber Removel
2WD 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...

Copyright www.ksmanual.com 2014-2026