Kia Sorento: Air Cleaner Repair procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Mechanical System / Intake And Exhaust System / Air Cleaner Repair procedures

Removal and Installation

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the air duct (A).

Remove the air cleaner assembly.

(1)	Disconnect the MAFS & IATS connector (A).

(2)	Disconnect the breather hose (A).

(3)	Disconnect the breather hose (B).

(4)

Disconnect the intake hose (C).

Tightening torque:

Hose clamp: 2.9 - 4.9 N·m (0.3 - 0.5 kgf·m , 2.2 - 3.6 lb·ft, 26.0 - 43.4 lb·in)

(5)

Remove the air cleaner assembly (D).

Tightening torque:

7.8 - 9.8 N·m (0.8 - 1.0 kgf·m , 5.8 - 7.2 lb·ft)

Engine Mechanical System — Intake And Exhaust System / Air Cleaner / Repair procedures / Removal and Installation illustration

4.	Install in the reverse order of removal.

Air cleaner filter replacement

1.	Remove the air cleaner filter cover (A) by lifting it off.

2.	Release the filter locking by turning the levers to "UNLOCK" position and then pull out the filter forward.

Replace the air cleaner filter (A) with a new one.

Engine Mechanical System — Intake And Exhaust System / Air Cleaner / Repair procedures / Removal and Installation illustration

When removing the air cleaner filter, pull the air cleaner filter handle forward.

If there is foreign substances in the air cleaner assembly, clean the inside of air cleaner assembly and then replace the filter.

4.	Fully insert the filter into the air cleaner and then close the filter cover (A) after turning the levers to "LOCK" position.

Air Cleaner Components and Components Location

Components 1. Air duct2. Air cleaner assembly 3. Air intake hose...

Intake Manifold Components and Components Location

Components 1. Intake manifold2. Intake manifold gasket3. Intake manifold stay4. Electronic Throttle Contorl (ETC) 5. Electronic Throttle Contorl (ETC...

Kia Sorento: Air Cleaner Repair procedures

See also:

Manuals list