Kia Sorento: Master Cylinder Installation - Brake System - Brake System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Master Cylinder Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Brake System / Brake System / Master Cylinder Installation

1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
Master Cylinder Removal
1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly. G 2.4 GDI (Refer to ...

Brake Line Components
...

See also:

Operation
Power Tailgate Opening ** - Primary switch signal received by PTGM via CAN bus (sent by IPM) PTGM Opening procedure: 1. Opening can be triggered after a signal i ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

SRS components and functions
The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor ...

Copyright В© www.ksmanual.com 2014-2024