1. Coupling assembly 2. Input shaft 3. Pressure sensor |
4. Extension wiring 5. Oil hydraulic Motor(Actuator) |
Fuel Pump Motor Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
...
Front Wheel Transfer Assembly Installation
1.
Install in the reverse order of removal.
1.
...
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a know ...