Kia Sorento: Output Speed Sensor Description

The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module(TCM). The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Input Speed Sensor Installation

1. Install in the reverse order of removal.    • ...

Output Speed Sensor Specifications

▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.45~1.9) 0.0571~0.0748 Output voltage (V ...

See also:

Inner panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. 3. Pull the suspected fuse straight out. Use the removal tool provided on the engine compartment fuse panel ...

Heater Unit Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. ...

Windshield Wiper-Washer Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A) after loosening 3 screws. ...