1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the IATS connector.
|
3. |
Measure resistance between the IATS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
Rear Glass Defogger Switch Inspection
1.
It will be able to diagnose defects of rear glass defogger with
GDS quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis. ...
Timing Chain Installation
1.
Install the balance shaft chain.
(Refer to Lubrication system - "Balance Shaft & Oil Pump")
2.
Install the crankshaft ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ...