1. |
Disconnect the battery negative (-) cable.
|
2. |
Disconnect the battery sensor connector (A).
|
3. |
Remove the battery negative (-) cable after removing the bolts
(B).
|
Component Location
1. Fuel filler door open switch
2. Fuel filler door release actuator
...
Tightening Torques
Engine Control System
Item
kgf.m
N.m
lb-ft
ECM installation nut
0.4 ~ 0.6
3.9 ~ 5.9
3.0 ~ 4.0
ECM bracket installation bo ...
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Install the start/stop button cover.
3.
Install the crash pad lower panel. ...