Kia Sorento: Smart Cruise Control settings - Smart Cruise Control (SCC) - Driver assistance guideKia Sorento: Smart Cruise Control settings

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driver assistance guide / Smart Cruise Control (SCC) / Smart Cruise Control settings

Smart Cruise Control

While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control on the infotainment system screen to set the distance, acceleration, and reaction speed for your Kia Sorento.

Based on driving style

Kia Sorento infotainment screen displaying Driver Assistance and Smart Cruise Control menu options
  1. Driver Assistance

  2. Smart Cruise Control

  3. Based on Driving Style

While the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Driving Convenience > Smart Cruise Control > Based on Driving Style. If Based on Driving Style is selected on the infotainment system screen, Smart Cruise Control operates based how you drive, taking into account distance between vehicles, acceleration, and reaction speed.

You can adjust the driving style manually to match your exact driving preferences in your Kia Sorento.

TIP

Warning Methods

Kia Sorento center display showing Driver Assistance and Warning Methods configuration menu
  1. Driver Assistance

  2. Warning Methods

To change the Warning Methods settings while the vehicle is ON, tap Setup > Vehicle > Driver Assistance > Warning Methods on the infotainment system screen. You can change the following settings:

TIP

Smart Cruise Control (SCC)
Basic function The advanced Smart Cruise Control system in the Kia Sorento is engineered to seamlessly detect vehicles traveling ahead, helping you maintain a secure, pre-set following distance ...
Smart Cruise Control operation
...
See also:

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

ESC Control Module Removal
1. Turn the ignition switch OFF. 2. Remove the surge tank. [G3.3 GDI] (Refer to Engine Mechanical System - "Surge Tank") ...

Front Wiper Motor Installation
1. Install the wiper motor. 2. Install the crank arm. Torque : 12.7-17.6Nm (1.3-1.8, kgf.m, 9.4-13.0 lbf. ...

Copyright © www.ksmanual.com 2014-2026 - 0.0356