Kia Sorento: Safe All Wheel Drive (AWD) operation. Driving in sand or mud - All Wheel Drive (AWD) system: (if equipped) - Driving your vehicleKia Sorento: Safe All Wheel Drive (AWD) operation. Driving in sand or mud

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driving your vehicle / All Wheel Drive (AWD) system: (if equipped) / Safe All Wheel Drive (AWD) operation. Driving in sand or mud

TIP

AWD

Compared to normal road conditions, on road or off road conditions that necessitate using AWD expose your Kia Sorento to extreme structural and mechanical stress. When utilizing the advanced AWD system, slow down and remain constantly alert for changes in the composition, grip, and traction of the road surface. If you ever have any doubt about the safety of upcoming road conditions, stop driving safely and consider the best way to proceed.

CAUTION

Steering wheel

When you are drive on an unpaved road, do not grab the inside of the steering wheel. If you do so, a sudden steering maneuver or steering wheel rebound caused by impact with objects on the ground may hurt your arm, and you could lose control of the steering wheel.

Driving in sand or mud

NOTE

Forcibly moving your vehicle to get it out of mud or sand can cause:

If the wheels slip excessively after you enter a sandy or muddy road, your Kia Sorento may settle deeper into the terrain. In this scenario, place a flat stone or tree branch under the affected tire, then try to pull out the vehicle or get it unstuck by repeatedly moving gently back and forth.

Transmission overheated

Instrument cluster message showing Transmission Hot! Park with engine on in a Kia Sorento

(A) Transmission Hot! Park with engine on

Instrument cluster message showing Trans cooled. Resume driving in a Kia Sorento

(A) Trans cooled. Resume driving.

If any of the warning messages on the instrument cluster continue to blink or persist, have the system inspected immediately by an authorized Kia dealer.

Tire precautions

Always pay close attention to the condition of the tires on your AWD vehicle.

Because AWD applies driving force to all 4 wheels, tire condition directly impacts your driving performance and safety:

Towing precautions

Proper flatbed towing setup for an AWD Kia Sorento vehicle
Towing guidelines for an FWD Kia Sorento model

An AWD Kia Sorento vehicle should never be towed with any of its wheels touching the ground. Your vehicle must be transported using a wheel lift with dollies or flatbed equipment so that all wheels are completely off the ground.

For more information, refer to the Towing section.

TIP

An AWD vehicle cannot be towed safely using sling-type equipment. Always use a wheel lift or flatbed equipment.

WARNING

Your Kia Sorento is equipped with tires engineered to maximize handling safety. Do not use tires or wheels that differ in size and type from original equipment specifications, as this can severely affect performance and lead to steering failure or a rollover. When replacing tires, ensure all 4 components match in size, type, tread, brand, and load capacity.

CAUTION

Jacked vehicle

While your Kia Sorento is being raised on a jack, never start the engine or allow the tires to rotate. If rotating tires touch the ground, your vehicle could shift off the jack and lunge forward.

  1. Check the recommended tire pressure values specified for your vehicle.

  2. Place the driven wheels securely on the roll tester (1) to conduct a speedometer test.

  3. Completely release the parking brake.

  4. Place the non-driven wheels on the temporary free roller (2).

WARNING

Dynamometer testing

Stay clear of the front of your Kia Sorento while it is in gear on the dynamometer test bench, as the vehicle can suddenly jump forward and cause serious injury or death.

TIP

AWD. Switching from/to Terrain Mode: (if equipped)
The sophisticated AWD architecture helps your Kia Sorento maintain peak driving performance by continuously monitoring and coordinating all 4 wheels, engine output, transmission ratios, and braki...
Brake system
Your Kia Sorento features advanced power-assisted brakes, a dependable parking brake, and integrated braking control systems designed to ensure maximum safety during every drive....
See also:

Heater & A/C Control Unit (Manual) Component
Connector Pin Function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 IG ...

Rear Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Rear Wiper Switch Rear Washer Swi ...

Technical data
System voltage: DC 12 V Working voltage: DC 10–12 V Amperage rating: max. 15 A Suitable temperatures: -22 to 158 &d ...

Copyright © www.ksmanual.com 2014-2026 - 0.0355