1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
|
2. |
Set No.1 cylinder to TDC/compression.
|
3. |
Remove the service hole bolt(A) of the timing chain cover.
|
4. |
Release the ratchet of the timing chain tensioner by pulling the link
down using a thin rod.
|
5. |
Remove the high pressure fuel pump bracket(A).
|
6. |
Remove the camshaft.
|
7. |
Disconnect the intake CVVT assembly(A) and exhaust CVVT assembly(B)
from camshaft(C).
|
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Parking Brake Assembly Removal
Parking Brake Shoe
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear tire and wheel.
3.
...
Installation
•
Note that internal damage may occur when the component
is dropped. If the component ...