![Kia Sorento: [CVVT System Mode] - Cylinder Head Assembly - Engine Mechanical System - Kia Sorento XM 2011-2024 Service Manual](images/pages/small/2.png)
Kia Sorento: [CVVT System Mode]
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Cylinder Head Assembly / [CVVT System Mode]
| (1) Low Speed / Low Load |
(2) Part Load |
|
|
| (3) Low Speed / High Load |
(4) High Speed / High Load |
|
|
| Driving Condition |
Exhaust Valve |
Intake Valve |
||
| Valve Timing |
Effect |
Valve Timing |
Effect |
|
| (1) Low Speed /Low Load |
Completely Advance |
* Valve Under-lap * Improvement of combustion stability |
Completely Retard |
* Valve Under-lap * Improvement of combustion stability |
| (2) Part Load |
Retard |
* Increase of expansion work * Reduction of pumping loss * Reduction of HC |
Retard |
* Reduction of pumping loss |
| (3) Low Speed /High Load |
Retard |
* Increase of expansion work |
Advance |
* Prevention of intake back flow (Improvement of volumetric efficiency) |
| (4) High Speed /High Load |
Advance |
* Reduction of pumping loss |
Retard |
* Improvement of volumetric efficiency |
CVVT & Camshaft Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated
by the engine oil supplied to the advance or retard chamber in accordance with
the CVVT oil control valve con ...
CVVT & Camshaft Removal
1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Set No.1 cylinder to TDC/comp ...
See also:
Auto Head lamp leveling Unit Description
According to driving environment and loading state of vehicle, head lamp
lighting direction is changed to keep the driver's visibility range and to protect
the driver's vision from gl ...
Occupant Detection system (ODS) Description
In order to make normal activation of airbag system, SRSCM detects DTC(s)
for the Passenger side Body Detection System. If the seat is occupied, Body
sensor detects how measuring electrostati ...
Engine Control Module (ECM) Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the ECM Connector (A).
...
Copyright В© www.ksmanual.com 2014-2024