Kia Sorento: Additional safety precautions. Adding equipment to or modifying your air bag-equipped vehicle - Air bag - Advanced Supplemental Restraint System - Seating and Safety RestraintsKia Sorento: Additional safety precautions. Adding equipment to or modifying your air bag-equipped vehicle

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Seating and Safety Restraints / Air bag - Advanced Supplemental Restraint System / Additional safety precautions. Adding equipment to or modifying your air bag-equipped vehicle

Additional safety precautions

WARNING

  • Sitting improperly or slouching out of position places occupants dangerously close to deploying airbags, increasing the risk of striking hard interior cabin structures or being ejected during severe accidents.

  • Always maintain a proper seating posture by keeping the seatback upright, centering your body on the seat cushion, fastening your seat belt snugly, extending your legs comfortably, and keeping both feet flat on the floor.

Adding equipment to or modifying your air bag-equipped vehicle

Modifying your Kia Sorento by altering its structural frame, aftermarket bumper systems, front-end sheet metal, side body panels, or suspension ride height can fundamentally alter vehicle deceleration profiles and negatively impact the precision timing and operation of your airbag system.

Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions of the air bag). Supplemental Restraint System (SRS) care
Why didn’t my air bag go off in a collision? (Inflation and non-inflation conditions of the air bag) Many types of vehicular accidents do not generate the specific deceleration vectors or fo...
Air bag warning labels
The U.S. National Highway Traffic Safety Administration (NHTSA) mandates specific safety warning labels, which are permanently affixed to the sun visors of your Kia Sorento to alert drivers and p...
See also:

Specifications
Direct control VFS[UD/B] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0) Current value(mA) ...

Front Strut Assembly Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Roof Antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the power cable (A). ...

Copyright © www.ksmanual.com 2014-2026 - 0.028