1. |
Install the heater control unit to the center fascia panel.
|
2. |
Install the center fascia panel.
|
PTG Spindle Installation
1.
Connect the PTG spindle, bracket and connector.
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
...
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench
(A).
Tight ...
Wipers & Washers
A : Wiper speed control (front)
MIST/ – Single wipe
OFF / O – Off
INT / --- – Intermittent wipe
AUTO – Auto control wipe
LO / 1 – Low wiper speed
HI / 2 – High wiper speed
B : In ...