Kia Sorento: Hands Free Switch Removal
Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Removal
| 1. |
Remove the driver airbag module.
(Refer to Restraint - "Airbag module")
|
| 2. |
Remove the steering wheel front cover (A) after loosening the
screws.
|
| 3. |
Disconnect the audio remote control switch connector (A).
|
| 4. |
Remove the handsfree remote switch (A) after loosening the screws.
|
Hands Free Switch Inspection
1.
Check the handsfree remote control switch for resistance between
No.2 and No.5 terminals in each switch position.
[Call + Hang Up]
Switch
...
Hands Free Switch Installation
1.
Install the handsfree remote switch to the steering wheel front
cover.
2.
Install the steering wheel front cover.
3 ...
See also:
Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance ...
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.62 ± 10％ [20°C (68°F)]
Secondary Coil Re ...
Using the USB device
To use an external USB device, make sure the device is not connected when
starting up the vehicle. Connect the device after starting up.
If you start the engine when the USB device is connected ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2025 Owners Manual
- Kia Sorento XM 2011-2025 Service Manual
Copyright www.ksmanual.com 2014-2025