Kia Sorento: IPM Removal - BCM (Body Control Module) - Body Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: IPM Removal

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / BCM (Body Control Module) / IPM Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")

3.
Remove IPM(Intelligent intergrated Platform Module) connector (A), bolts and nut

4.
Remove IPM after removing rear connectors.
IPM Function
1. Wiper & Washer Control (1) Front Washer Interlocking Wiper Control If washer switch (WasherSW) is ON at the status of IG ...

IPM Installation
1. Install IPM(Intelligent intergrated Platform Module). 2. Connect the IPM connector. 3. Install the crash pad ...

See also:

Seat Heater Installation
1. Install the driver / assist seat heater. (Refer to Body - "Front seat") 2. Install the rear seat LH heater and RH heater. ...

Rear Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. ...

Tail Gate Adjustment
1. After loosening the tailgate hinge (A) mounting bolt, adjust the tailgate by moving it up or down, or right or left. 2. Adjust the tailg ...

Copyright www.ksmanual.com 2014-2025