|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the floor console upper
tray (A).
|
3. |
Disconnect the connectors (A).
|
4. |
Remove the gear boots (B) and gear knob (A).
|
5. |
Using a screwdriver or remover, remove the console upper cover
(A).
|
6. |
Disconnect the connectors (A).
|
7. |
Remove the AC switch (A) from the console upper cover.
|
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
...
Seat Heater Installation
1.
Install the driver / assist seat heater.
(Refer to Body - "Front seat")
2.
Install the rear seat LH heater and RH heater.
...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be used ...