Kia Sorento: Windshield Wiper-Washer Switch Removal
Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Windshield Wiper/Washer / Windshield Wiper-Washer Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds (A) after loosening
3 screws.
|
| 3. |
Remove the wiper switch (A) with pushing the lock pin (C) after
disconnecting the connector (B).
|
Component Location
1. Windshield wiper arm & blade
2. Wiper & washer switch
3. Windshield washer hose
4. Windshield wiper motor & linkage
5. Washer motor
6. Washer reservoir
...
Windshield Wiper-Washer Switch Installation
1.
Install the windshield wiper switch.
2.
Connect the wiper switch connector.
3.
Install the steering column u ...
See also:
Positive Crankcase Ventilation (PCV) Valve Removal
1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).
...
Cooling Fan Description
Control the cooling motor voltage in according to the duty(300Hz) of ECM.
[ECU → PWM Input Signal(SI : 300Hz)]
Signal Input Duty (%)
Motor Voltage (V)
10
...
Troubleshooting
Symptom
Suspect Area
Remedy (Refer to page)
Water leaks from panorama sunroof
Deteriorated roof lid weatherstrip
Replace
Excessive roof lid ...
Copyright © www.ksmanual.com 2014-2019