Subaru Forester: Using a flat-bed truck - Towing - In case of emergencySubaru Forester: Using a flat-bed truck

Subaru Forester 2019-2021 Owners Manual / In case of emergency / Towing / Using a flat-bed truck

Subaru Forester. Using a flat-bed truck

This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation.

  1. Shift the select lever into the “P” position.
  2. Apply the parking brake firmly.
  3. Secure the vehicle onto the carrier properly with safety chains. Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out.

CAUTION

Front tie-down hooks / Rear tie-down holes
...

Towing with all wheels on the ground
Release the parking brake and put the transmission in the neutral position. The ignition switch should be in the “ON” position while the vehicle is being towed. Take up slack in the ...

See also:

Rear Driveshaft Components
1. Tone wheel 2. BJ joint 3. BJ boot 4. BJ boot big part band 5. BJ boot small part band 6. Shaft 7. TJ boot small part band 8. TJ boot big part band 9. TJ boot ...

Ignition Coil Removal
1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Compressor Disassembly
1. Remove the engine room under cover by loosening the mounting clip (A) and bolts (B). 2. Separate the front portion of the front ...

Copyright www.ksmanual.com 2014-2021