Kia Sorento: Rear parking assist system (If equipped) - Features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Rear parking assist system (If equipped)

Second Generation XM (2011-2020) / Kia Sorento XM Owners Manual / Features of your vehicle / Rear parking assist system (If equipped)

The rear parking assist system assists the driver during backward movement of


The rear parking assist system assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 47 in. (120 cm) behind the vehicle.

This system is a supplemental system and it is not intended to nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the back sensors are limited. Whenever backing-up, pay as much attention to what is behind you as you would in a vehicle without a rear parking assist system.

WARNING

The rear parking assist system is a supplementary function only. The operation of the rear parking assist system can be affected by several factors (including environmental conditions). It is the responsibility of the driver to always check the area behind the vehicle before and while backing up.

Warning lights
✽ NOTICE - Warning lights Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Air bag Warning Ligh ...

Operation of the rear parking assist system
Operating condition This system will activate when the indicator on the rear parking assist OFF button is not illuminated. If you desire to deactivate the rear parking assist system, press the re ...

See also:

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition ...

Cruise Control Switch Inspection
Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between t ...

Oil Cooler Installation
1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B). Tightening torque: ...

Copyright © www.ksmanual.com 2014-2020