Kia Sorento: PTG Spindle Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: PTG Spindle Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Power Tailgate Module / PTG Spindle Installation

1.
Connect the PTG spindle, bracket and connector.

Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)

2.
Install the tailgate trim and Luggage side trim.
3.
Connect the negative (-) battery terminal.
PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate& ...

Windshield Wiper/Washer
...

See also:

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Ins ...

Antenna Inspection
Antenna Cable 1. Remove the antenna jack from the audio unit and antenna. 2. Check for continuity between the center poles of antenna cable. ...

Special Service Tools
Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) ...

Copyright © www.ksmanual.com 2014-2019