Kia Sorento: Output Speed Sensor Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Output Speed Sensor Installation

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Installation

1.
Install in the reverse order of removal.
  
Х
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
Х
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
Output Speed Sensor Removal
1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

Torque Converter Control Solenoid Valve (T/CON_VFS)
Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

See also:

Components Location
1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) 9. ...

A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

Rear Cross Member Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.ksmanual.com 2014-2020