Kia Sorento: Fender Replacement - Exterior - Body (Interior and Exterior) - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Fender Replacement

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Body (Interior and Exterior) / Exterior / Fender Replacement

  
Х
When removing and installing the hood, an assistant is necessary.
Х
Be careful not to damage the hood and body.
Х
When removing the clips, use a clip remover.
1.
Remove the following parts.
A.
Front Bumper
B.
Head Lamps
(Refer to "Head Lamps" in BE group)
C.
Side Sill Moulding
2.
Loosen the front mud guard mounting clips and screws.

3.
After loosening the mounting clips, then remove the fender side cover (A).

4.
After loosening the mounting bolts, then remove the fender assembly (A).

5.
Install in the reverse order of removal.
Exterior
...

Hood Replacement
Hood Assembly Replacement    Х When removing and installing the hood, an assistant is ...

See also:

Delivery Pipe Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

Dynamic Damper Installation
1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

Inspection
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Copyright © www.ksmanual.com 2014-2021