Kia Sorento: Description

Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.

To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermister and it's resistance changes in reverse proportion to the temperature.

Intake Air Temperature Sensor (IATS)

...

Specification

Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 -20 -4 13.89 ~ 16.03 0 32 ...

See also:

Passenger Airbag (PAB) Module Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...

Erasing programmed HomeLink buttons
To erase the three programmed buttons (individual buttons cannot be erased): Press and hold the left and center buttons simultaneously, until the indicator light begins to flash (approximately 20 ...

Power Door Lock Switch Installation
Driver Power Window Main Switch 1. Install the driver power window switch assembly and connectors. 2. Install the front door trim. ...