Kia Sorento: Cylinder Head Cover Components

Valve Clearance Inspection And Adjustment

   Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder ...

Cylinder Head Cover Removal

1. Disconnect the battery negative terminal. 2. Remove the engine cover. 3. Remove the air duct and air cleaner ...

See also:

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...

Crash Pad Replacement
Cluster Fascia Panel Replacement    • Pry the trim off using a plastic trim tool and apply p ...