Kia Sorento: Curtain Airbag (CAB) Module Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Restraint / Airbag Module / Curtain Airbag (CAB) Module Removal
| 1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
| 2. |
Remove the roof trim. (Refer to the Body group- Interior)
|
| 3. |
Disconnect the curtain airbag harness connector.
|
| 4. |
After loosening the mounting bolts (10EA) remove the curtain airbag.
|
Curtain Airbag (CAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
See also:
Rear Blower Resister Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
...
Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset
/ relearned according to the following procedure.
1.
Check DTC(s) and clear if exist.
...
Start/Stop Button Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel (A).
(Refer to Body - "Crash pad")
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026