Kia Sorento: Cowl Top Cover Replacement - Exterior - Body (Interior and Exterior) - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Cowl Top Cover Replacement

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body (Interior and Exterior) / Exterior / Cowl Top Cover Replacement

1.
Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.
Disconnect the nozzle hose (B).
3.
Detach the clips, then remove the cowl top cover (A).

4.
Install in the reverse order of removal.
  
Х
Replace any damaged clips.
Mirror Replacement
Outside Rear View Mirror Assembly Replacement    Х When prying with a flat-up screwdriver, wra ...

Console Components
[M/T] 1. Floor console assembly 2. Console upper cover 3. Console side cover [LH] 4. Console side cover [RH] 5. Rear console cover 6. Floor console mounting ...

See also:

Inspection
Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TP ...

OBD-II review
1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, O ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. Dis ...

Copyright © www.ksmanual.com 2014-2019