Kia Sorento: Automatic climate control system (If equipped) - Features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Automatic climate control system (If equipped)

Second Generation XM (2011-2019) / Kia Sorento XM Owners Manual / Features of your vehicle / Automatic climate control system (If equipped)

1. A/C display


1. A/C display
2. Driver's temperature control knob
3. AUTO (automatic control) button
4. Front blower OFF button
5. Front fan speed control switch
6. Mode selection button
7. Dual temperature control selection button
8. Passenger's temperature control knob
9. Air conditioning button
10. 3rd row air conditioning ON/OFF button (controlled from the front)
11. Air intake control button or recirculated air position button
12. Front windshield defroster button
13. 3rd row air conditioning fan speed control switch

1. Driver's temperature control knob


1. Driver's temperature control knob
2. AUTO (automatic control) button
3. Front blower OFF button
4. Front fan speed control switch
5. Mode selection button
6. Dual temperature control selection button
7. Passenger's temperature control knob
8. Air conditioning button
9. 3rd row air conditioning ON/OFF button (controlled from the front)
10. Air intake control button or recirculated air position button
11. Front windshield defroster button
12. Climate control display
13. 3rd row air conditioning fan speed control switch

Automatic heating and air conditioning

1. Press the AUTO button. The modes, fan speeds, air intake and air-conditioning


1. Press the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by setting the temperature.

2. Turn the temperature control knob to the desired temperature.


2. Turn the temperature control knob to the desired temperature.

✽ NOTICE

✽ NOTICE


✽ NOTICE

Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.

Climate control air filter (if equipped)
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If ...

Manual heating and air conditioning
The heating and cooling system can be controlled manually by pressing buttons or turning knob(s) other than the AUTO button. In this case, the system works sequentially according to the order of but ...

See also:

Parking Brake Pedal Assembly Removal
1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - & ...

Thermostat Inspection
1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valv ...

Battery Sensor Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...

Copyright © www.ksmanual.com 2014-2019