Kia Sorento: Parking Brake Cable Removal
| Parking brake pedal Type |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
|
| 3. |
Remove the parking brake cable mounting nut (A) and bolts(B).
|
| 4. |
Remove the parking brake cable adjusting nut (A) and the fixing
clip (B), and then remove the parking brake pedal.
|
| 5. |
Remove the floor console.
(Refer to Body - "Floor console")
|
| 6. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
| 7. |
Raise the vehicle, and make sure it is securely supported.
|
| 8. |
Remove the rear wheel & tire.
|
| 9. |
Remove the parking brake cable (B) after removing the fixing clip
(A).
|
| 10. |
Loosen the parking brake cable bracket bolts and remove the rear
parking brake cable.
|
| 11. |
Installation is reverse of removal.
|
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the floor console.
(Refer to Body - "Floor console")
|
| 3. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
| 4. |
Raise the vehicle, and make sure it is securely supported.
|
| 5. |
Remove the rear wheel & tire.
|
| 6. |
Remove the parking brake cable (B) after removing the fixing clip
(A).
|
| 7. |
Loosen the parking brake cable bracket bolts and remove the rear
parking brake cable.
|
| 8. |
Installation is reverse of removal.
|
Parking Brake Pedal Assembly AdjustmentFront Oil Seal Removal and Installation
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pullty")
2.
Remove the front oil seal(A). ...
High Mounted stop lamp Removal
High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to Body - " ...
General Service Information
Protection Of The VehicleAlways be sure to cover fenders, seats, and floor areas
before starting work.
The support rod must be ...