Kia Sorento: Brake Booster Installation - Brake System - Brake System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Brake Booster Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Brake System / Brake System / Brake Booster Installation

1.
Installation is the reverse of removal.
  
Before installing the pin, apply the grease to the joint pin.
Use a new snap pin whenever installing.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
Brake Booster Inspection
1. Inspect the check valve in the vacuum hose, intensifier and the connecting section.    ...

Master Cylinder Components
1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...

See also:

Panorama Sunroof Components
1. Roof side moulding [LH] 2. Roof side moulding [RH] 3. Movable glass 4. Slide 5. Cover base 6. Wind deflector 7. Panorama sunroof frame assembly 8. Mechanism rai ...

Engine Control Module (ECM) Installation
1. Install in the reverse order of removal. ECM installation bolt: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft) ECM ...

Dynamic Damper Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Copyright www.ksmanual.com 2014-2026