Kia Sorento: Flex Steering Replacement - Steering wheel - Steering System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Flex Steering Replacement

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Steering System / Steering wheel / Flex Steering Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove the steering wheel.
(Refer to Steering Wheel - "Steering Wheel Assembly")
4.
Disengage the steering wheel remote switch connector assembly.
(Refer to Body Electrical System - "Audio Remote Control")
5.
Remove the flex streeing switch (A).

6.
Installation is the reverse of the removal.
  
Make sure that the switch connector is plugged in properly.
Flex Steering Inspection
1. Check the audio flex streeing switch (A) for resistance between terminals in each switch position. Switch Resistance (±5%) ...

Electric Power Steering
...

See also:

Operation
Power Tailgate Opening ** - Primary switch signal received by PTGM via CAN bus (sent by IPM) PTGM Opening procedure: 1. Opening can be triggered after a signal i ...

Heater Unit Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. ...

Variable Intake Solenoid (VIS) Valve
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or ...

Copyright www.ksmanual.com 2014-2026